2 Watt 16 Channel Long Distance Wireless Video System

2 Watt 16 Channel Long Distance Wireless Video System

On sale$197.00
Out of Stock
Part Number:PD12-2000
Replaced with our 3 Watt 1.2 GHz system click here for details

The PD12-2000 long range transmitter provides excellent distance with line of sight and more penetrating power when obstacles are in the way. The 1.2 GHz frequency is not affected by nearby 2.4 GHz or 5.8 GHz devices which can cause interference or loss of signal when using those respective frequencies. Line of sight range can be up to 1/2 mile with clear unobstructed view and the antennas mounted at least 15 feet off the ground.

Of course most situations will have some obstructions and require lower placement of equipment with attached antennas. The distances achieved in these situations will depend on the amount and type of obstacles but the lower 1.2 GHz frequency has good penetrating ability. Metal and concrete are the most difficult to pass signals through while normal wood and drywall construction is much easier to penetrate.
  • High power with 16 channels
  • Plug in most any composite analog video camera
  • Eliminates the need to run and conceal video wires
  • Receiver easily connects to TV, monitor, DVR or VCR
  • Rated for 24/7 continuous operation
Multiple Channel Receiver
Easily change to any of the 16 available channels using the push buttons. The receiver is capable of outputting the signal received from any transmitter channel but only one at a time. If you need to view or record two or more channels at the same time you will need a separate receiver for each transmitter.

Transmitter/Receiver Specifications:
1.2 GHZ
Up to 1/2 mile line of sight distance with the included antennas. Longer distance and better penetration of obstacles can be achieved with the use of high gain directional antennas.

Transmitter: 3-3/4" x 2-1/4" x 1" - Antenna Connection: SMA (female)
Input Source: Accepts video inputs from most any analog composite video source such as security cameras or camcorders. The transmitter has RCA female inputs so if the camera has a BNC female plug you will need a RCA Male to BNC Male Adapter
Power Required: 12 volts DC
Channels: 16 separate channels
Power Output: 2W
Transmitter Current Usage: 480mA

Receiver: 4-1/2" x 3" x 3/4" - Antenna Connection: Female F connector
Channels: 16 channels total - Channels match transmitter.
Output: Female RCA audio and video connections (if a different output connection is needed please see our connectors and adapters .
Power Required: 12 volts DC
Receiver Current Usage: 200m

Included with Purchase:

One 1.2 GHz 2W 16 CH A/V transmitter
One Matching Multiple Channel Receiver
One 12 volt DC Power Supply for Receiver
One 12 volt DC Power Supply for Transmitter
Two Omni Directional Antennas
Two A/V patch cables - RCA male connections
One Year Warranty

5 Stars
We are so pleased with our purchase and the prompt shipment
We use the video camera to watch over 3 of our oldest horses on the farm who have trouble getting back to their feet when they lay down. If a horse stays down too long they will suffocate due to the weight of their own body mass. Our barn is about 1500 feet from our house so I have made many trips to the barn in the middle of the night to just check on them. Now with the video system I can see them from the comfort of my bed and I now go out only when I need to. It is the best investment I have ever made and I couldn't be happier. Thank you for returning my sleep to me.
Did you find this helpful? 
Reviewed by:  from Frankfort Ky. on 3/18/2016
5 Stars
The PD12-2000 worked fine. Thanks again for your help. Great doing business with you. I will be sure to consider your products in future integrations
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Virginia. on 2/12/2015

Recently Viewed Items