PD12-3000 video transmitter set is our longest distance analog
transmitter. Capable of over 1/2 mile range with the included antennas
when you have line
of sight operation. The 1.2 GHz signal also provides good penetrating
power when obstacles such as buildings and trees are in the way but the
distance will be reduced. The
1.2 GHz frequency allows for use alongside 2.4 GHz or 5.8 GHz devices
without interference. Line of sight range can be over 1/2 mile with
clear unobstructed view and mounting the unit or antennas at least 15
from ground surface.
applications however don't allow for the ideal mounting with clear line
of sight. Distances when line of sight is not possible are difficult to
estimate since every object can cause different effects. Metal and
concrete are the most difficult to pass signals through and even the
type of trees or other vegetation will affect the signal differently.
So many times you will just need to test the unit to see if it will
work for your application and we do allow returns if it doesn't work
for your application.
- 16 channels to avoid any interference
- Accepts most any composite
analog video camera or signal
Eliminates the need to run and
conceal video wires
Receiver easily connects to TV,
monitor or DVR
- Rated for 24/7 continuous operation
Easily change to any of the 16 available
channels using the push buttons. The receiver can be set to match any of the 16 channels
from one of our 1.2 GHz transmitters but can output only one signal channel at a time.
or recording multiple outputs simultaneously
will require individual transmitter and receiver sets. However multiple
receivers can display the same transmitter signal which may be handy
for receiving the same signal at different locations.
Over 1/2 mile line of sight distance with the
antennas. Longer distance and better penetration of obstacles
can be achieved with
the use of high gain directional antennas.
3-3/4" x 3-1/2" x 1-3/4" - Antenna Connection:
video inputs from most any analog composite video source such as
security cameras or camcorders. The transmitter has RCA female inputs
so if the camera has a BNC female plug you will need a
to BNC Male Adapter
12 volts DC
16 separate channels
x 3" x 3/4" - Antenna Connection: Female F connector
channels total - Channels match transmitter.
audio and video connections (if a different output connection is needed
please see our
12 volts DC
One 1.2 GHz 3W 16 CH A/V transmitter
One Matching Multiple Channel Receiver
One 12 volt DC Power Supply for Receiver
One 12 volt DC Power Supply for Transmitter
Two Omni Directional Antennas
Two A/V patch cables - RCA male connections
One Year Warranty