Strobe Wireless Security System

The Strobe Security System is a complete wireless security system for your home or office which you can install in minutes. This system provides you and your family with the same security and peace of mind found in professionally installed security systems but without the high cost and expensive monitoring fees.

It monitors your home using a motion sensor and two glass break sensors that can also be used as magnetic contact sensors. The motion detector can detect motion from up to 30 feet away. If not disarmed by the owner using one of the two included remote controls, it will respond with an ear piercing alarm and blinding strobe light. A switch on the side of the strobe light allows the light to remain on and used for emergency lighting during a power outage. The glass break sensors will detect the vibration caused from someone attempting to break in through a window. You can adjust it's sensitivity, turn it off, or cause the alarm to sound instantly or after a delay. You can also plug a magnetic contact sensor into the side of the glass break sensor to detect the opening of a door or window. This dual level of security is very important in protecting sliding glass doors. A burglar will be detected if attempts to break the glass or if he attempts to pry the door open.

The system includes a wireless, external siren which can be mounted on the outside your home or business. If the motion detector, the glass break sensor, or the magnetic contact detects an intruder it will send a signal (RF) to the external siren which will also respond with an ear piercing siren and strobe light. With siren sounding and lights flashing both inside and outside your home or business, the burglar will be scared off and help will come from neighbors.

The system also includes a lightweight remote panic alarm that can be attached to a keychain or worn around the neck. This can be used by an elderly person who has fallen down to get help from neighbors.

The complete system includes 1 motion detector with alarm and strobe, 2 remote controls, 2 glass break sensors and/or magnetic contacts, 1 external siren with alarm and strobe, 1 panic remote with neck cord, 2 alarm system warning decals, and adjustable mounting brackets and screws for the motion detector and external siren.