400mW Audio Video Transmitter and Receiver

400mW Audio Video Transmitter and Receiver

Your Price:$139.00
Out of Stock
Part Number:PD12-400US

Rangefrom 700 to 2000 feet Line of Sight

If you need a transmitter in a small size with the power to send video and audio signals up to 1000 feet with no obstructions the PD12-400 is the unit. The 1280 MHz frequency will not suffer interference from  standard 2.4 GHz or 5.8 GHz equipment. It is also capable of penetrating walls and other obstacles but with reduced range..

Greater distances even over 2000 ft. can be achieved by using directional high gain antennas. When using the units the included omni-directional antennas try to place both units as high as possible for best results. This doesn't mean you can't mount or place them just a few feet high, only the signal will have slightly less distance since the ground itself will cause some loss of signal. The hardest obstacles for the signals to pass through are metal, concrete or brick which will decrease the distance the most..

  • Easily converts security cameras or other composite video signals into a wireless video camera
  • Small transmitter sends both video and audio signal wirelessly to DVR, VCR, TV or display Monitor
  • 1.2 GHz transmission frequency
  • 2 US approved wireless frequency channels

    Purchases Consists of:
    1- Transmitter with audio & video connection cable
    1- Frequency Matching Multi-Channel Receiver
    1- 12VDC Power Adapter for Receiver
    1- 12VDC Power Adapter for Transmitter
    2- Omni-Directional Dipole Antennas
    1- Year Service Warranty
   Transmitter and Receiver Specifications:
1.2 GHZ
Range: With the omni-directional antennas included 700 to 1000 feet line of sight can be expected. 2000 feet or more LOS distance requires attaching higher gain directional antennas (not included)

Transmitter: 2-7/8" x 1-1/8" x 9/16" - Antenna Connection: SMA (female)
Channels: 2 separate selectable channels
Input Source: Connect any composite video signal (audio and video input connectors are RCA male, if using video connection with BNC you will need a BNC/RCA adapter)
Power Requirement: DC 12 volts
Power Output: 400mW
Transmitter Current Usage: 250mA

4" x 3" x 1" - Antenna Connection: SMA (female)
Channels: 12 separate channels total- 2 matching the 1.2 GHz transmitter channels
Output: BNC female audio and video connections (if you need to adapt to a different format please see our connectors and adapters.
Power Requirement: DC 12 volts
Receiver Current Usage: 250mA

5 Stars
This is my second unit from this seller. I was pleased with the first for one security camera, and bought the second for another camera. I could not be more pleased. They have been in service now for several months and have given no trouble whatsoever, once this author determined that he should really read the installation instructions, and discovered to his dismay that the smaller of the two units was the transmitter, and not the receiver as he had assumed. He found that attempting to hook up his transmitter to the tv set was a perfectly good reason why he failed to get a picture.The units were re-installed as the instructions directed, and both have worked flawlessly as advertised. One transmits about 300 feet though two walls; the other 500 feet through four or five. The pictures are perfect.
Did you find this helpful? 
Reviewed by:  from Albia, Iowa. on 12/6/2012
4 Stars
The transmitter & receiver work well I am getting a good signal, line of sight about 600'. The transmitter seems to run a little hot so I added heat sinks for piece of mind.
Did you find this helpful? 
Reviewed by:  from Maine. on 6/11/2012
5 Stars
Excellent Sys
This xmitter/rec pair was tested and even worked through dense walls with the antenna pointed in different polar angles. I am extremely pleased with the performance, power, and stability of this device.
Did you find this helpful? 
Reviewed by:  from Concord. on 6/11/2009

Recently Viewed Items