Digital Video Transmitter for Long Range Applications
Digital Video Transmitter for Long Range Applications

Digital Video Transmitter for Long Range Applications

2 Review(s)
On sale $229.00 $194.00
Wireless Transmission up to 3000 feet unobstructed view without interference from other 2.4 GHz equipment
Part Number: PD2420
Availability: Out of Stock

Our higher power PD2420 Digital Wireless Transmitter and Receiver can transmit video signals up to 3000 ft. with unobstructed view between transmitter and receiver antennas. The existing antennas are also removable so you can attach higher gain directional antennas for extending the wireless range.

Our PD2420 Digital Wireless Transmitter uses spread spectrum frequency hopping innovation along with digital paring for privacy and no interference signal transmission. Video images can be sent from security cameras, televisions, camcorders or other equipment with a standard composite video signal. The images are digitally sent in 720 x 480 resolution for a very clear and stable picture.

12 volt DC power operation make it easy to power both the camera and transmitter for a single power source such as the included power supply, battery pack or even solar power if available. An IR extender is also included for sending control signals from a remote control.

  • Send video and stereo audio signal wirelessly to receiver connected to DVR, TV or monitor
  • Digital encrypted signals
  • Works alongside other 2.4 GHz equipment without interference due to the frequency hopping auto channel selection.

Input/Output: RCA female video and audio connectors (if you need to adapt to a different format please see our connectors and adapters .

Antenna inputs: Transmitter and receiver have reverse polarity SMA female connectors so any replacement antenna or antenna cable must have a reverse polarity SMA male connector.

Transmitter Specifications:
Operating Frequency Band: 2.403GHz~2.478GHz
Maximum Transmit Power: 200mW
Modulation: 16QAM/QPSK/BPSK
Video Input Level: 1V p-p @ 75 ohm
Audio Input Level: 1V p-p @ 600 ohm (STEREO)
Antenna: Omni-directional
IR remote: IR output 940nm with ON/OFF keying
Power consumption: 2.7W
Power supply: 12V/1A
Dimensions: 3-1/2" (W) x 3-1/8" (D) x 15/16" (H) / 4-1/2" wide including flange
Weigh:t: 82g, 5oz.

Receiver Specifications:
Operating Frequency Band: 2.403GHz~2.478GHz
Receiver Sensitivity: -85dBm min.
Video Output Level: 1±0.2V p-p @ 75 ohm
Audio Output Level: 1±0.2V p-p @ 600 ohm (STEREO)
Antenna: Omni-directional
IR remote: IR Input 940nm with ON/OFF keying
Power consumption: 2.7W
Power supply: 12V/1A
Dimension: 3-1/2" (W) x 3-1/8" (D) x 15/16" (H) / 4-1/2" wide including flange
Weight: 82g, 5oz.

System:
Transmission channels: 26 channels auto selection Video bit rate up to 12Mbps
Random ID code: up to 4 million sets
Video resolution: 720 x 480 @ 30 fps (NTSC)

Purchase Includes:

  • 200mW Digital Transmitter
  • Digital Receiver
  • Two Omni-directional antennas
  • Two 6 ft. RCA A/V patch cables
  • Two IR Remote Extender cables for transmitter and receiver
  • One 12VDC power supply for Receiver
  • One 12VDC power supply for Transmitter
  • One Year Warranty
Write a Review
TOP