700mW 2.4 GHz Audio and Video Sender and Receiver
700mW 2.4 GHz Audio and Video Sender and Receiver

700mW 2.4 GHz Audio and Video Sender and Receiver

On sale $179.00 $139.00
Wireless video sender with receiver up to 1200' Range with included antennas or 5000' with high gain antenna
Part Number: PD24-700
Availability: Out of Stock
The PD24-700 video transmitter and receiver is both small and efficient. The wireless 2.4 GHz frequency sends clear sharp audio and video between rooms and walls. The video transmitter has 12 separate channels which permits using many camera and receiver sets in one location and also helps with interference from 2.4 GHz wireless networks. However if you have many 2.4 GHz signals in one area you may want to use our digital transmitter which will not be affected by other wireless networks, cordless phones or microwave ovens.
  • Converts wired video cameras into wireless camera (surveillance cameras, camcorders, etc.)
  • Transmits both video and audio signals with no wires to video recorders, TVs or Monitor
  • Operates on 2.4 GHz frequency
  • Twelve distinct channels for multiple wireless cameras in one location
Multiple Channel Receiver
The Receiver has push button channel selection for quick and convenient viewing of video from any of the 12 channels. Please Note: the receiver can be switched to any of the 12 channels for video display however viewing of all the channels at the same time requires using individual transmitter and receiver sets.

Transmitter/Receiver Specifications:
2.4 GHz
Range: With the included omni-directional antennas around 900 to 1200 feet line of sight can be expected. 5000 feet range or more with line of sight will require using high gain directional antennas on both the transmitter and antenna. Transmission through walls or other obstacles can significantly decrease the range, concrete and metal are the most difficult to penetrate.

2-1/2" x 1-5/8" x 1/2" - Connector: Female SMA
Input Source: Connect any composite video signal (audio & video inputs are RCA male, if your camera has BNC video connectors you will need a BNC/RCA adapter)
Power Required: 12 volt DC
Channels: 12 separate 2.4 GHz channels
Power Output: 700mW
Transmitter Current Usage: 325mA

Receiver: 4" x 3" x 1" - Antenna Connector: SMA (female)
Channels: 12 channels that match transmitter channels.
Output: BNC female audio and video connections (if you need to adapt to a different format please see our connectors and adapters.
Power Required: 12 volts DC
Receiver Current Usage: 250mA

Your Purchase Will Include:

1- 12 Channel Transmitter with video and audio connector cable
1- 12 Channel Frequency Matching Receiver
1- 12 volt DC Power Supply for Receiver
1- 12 volt DC Power Supply for Transmitter
2- Dipole Antennas - Omni-Directional
One Year Warranty

Write a Review