PD-209 - Four Wireless Camera and Receiver Set with Night Vision

   This weatherproof wireless security camera system with audio can be setup in minutes. Just mount the cameras where you want, and plug in the power. Plug in the cable from the receiver to your TV inputs. Turn in on and push the AUTO button. The receiver will scan through the cameras with 3 seconds on each one. You can also push the channel button of any camera to go right there.

Another great feature of this wireless camera system is the receiver has a separate audio and video output for each channel. That means you could run the output of each channel into a DVR or quad processor for simultaneous viewing and recording. Most wireless systems would require a separate receiver for each channel.

The Night Vision CMOS wireless cameras have 12 Infra-Red LED’s for 25 to 30 feet illumination in complete darkness. If further illumination is required you can use additional IR illuminators or provide more ambient light. The LED's turn on automatically when the light gets too low and shuts off automatically when their is plenty of light for the camera. The Cameras come with a pan/tilt mount that can be simply set in place or securely mounted in a permanent location.

• CMOS Color Omniview Sensor 350 lines resolution with audio
• 300 to 500 Foot Line Of Sight Range - Range through walls will be less, expect 80 to 150 feet depending on type. Concrete and metal will adversely affect range the most.
• Operating frequencies: 2.414GHz, 2.432GHz, 2.450GHz, 2.468GHz
• 60 Degrees Field of View
• 12 LED's for 25 to 30 feet illumination
• Auto Channel Switch
• watch 4 locations
• Operating Voltage 12VDC
• Includes all cords and power supplies